DELO-DOT PN5 - A new high-performance micro dispensing valve that can reproduce dispensing results at a dispensing frequency of up to 300 Hz. The plunger speed reaches twice the maximum value of its predecessor, DELO-DOT PN3.

This pneumatic jet valve is easy-to-use and features tool-free maintenance of its fluid system. Its compact design allows for easy integration into production systems.

The DELO-DOT PN5 offers a contactless application preventing collisions between the dispensing valve and the component. High-viscous materials and difficult media can be dispensed accurately, precisely, and reliably.

• The DELO-DIV VD600 is the larger model in DELO's new line of metering dispensing valves. Thanks to the screw piston principle, it provides perfect accuracy, regardless of the viscosity of the adhesive.

• With a dispensing volume from 1.4 to 16.0 ml/min, the DELO-DIV VD600 is best suited when larger flow rates are required.

• A glue that is compatible with both heat and UV curing methods;
• Ingredients: is a 1-component glue, derived from modified epoxy, without solvents;
• Especially for the quick fixation of components that need to be dried at low temperature;
• Operating temperature range from -40°C to +180°C; depending on the application.
• Complies with RoHS 2015/863/EU;
• Halogen-free according to IEC 61249-2-21;
• Low coefficient of air release according to ASTM E 595-93;

• Specialized in optical materials such as adhesion between the base layer of solar panels and the outer protective PE film, helping to create flexibility and flexibility for thin film solar panels.
• Bonding of temperature-sensitive materials.

The High Power Burn-in System HPB-4B

Meets the challenge of high-power semiconductor burn-in testing

Chip
CPU
RAM
Circuit board
Microprocessor

The High Power Burn-in System HPB-5C

Meets the challenge of high-power semiconductor burn-in testing

      Chip

      CPU

      RAM

Burn in test system LC-2

Sophisticated Low-cost Burn-in System with Individual Temp Control

DELO has developed DELO DUALBOND BS3770 adhesive, a special electronics adhesive for semiconductor manufacturers to meet the rigorous quality and reliability tests of car manufacturers.

It is a modified polycarbamin acid derivate, free of solvents, 1C, light-fixable, heat-curing mandatory,  tension-equalizing, thixotropic, and reflow-resistant.

Model: ACV-16041 Series

Origin: Taiwan

Model: ACV-16049 Series

Origin: Taiwan

Model: ACV-16051 Series

Origin: Taiwan

Model: ACV-16059 Series

Origin: Taiwan

• Each axis has 2 linear guide rails, providing greater stability.
• Z-axis brake motor, greatly increases equipment stability and movement precision.
• Standard 4 liter ingredient tank (optionally available 0.5L, 2L, 4L, 20L).
• Equipped with a quantitative glue control system with an air pressure injection valve to spray the glue onto the product for uniform thickness.
• High-precision pressure regulating valve, suitable for a three-axis working platform, stable and accurate control of output glue, and no splashing of glue.
• The spray width adjustment range is 2mm-20mm, and jet and mist spraying can be realized.

Model: TH-2004D-300-2004AB1

• Specialized for 50 ml 2-component glue bottles.
• Equipped with a quantitative glue control system using air pressure and time.
• The controller accurately controls the amount of glue pumped out, and has a vacuum mode to prevent the glue from dripping when the pump stops.