DELO Industrial Adhesives

• The content of quality inspection of different coating products varies depending on the part and coating, but the appearance, thickness, corrosion resistance and bonding force with the base metal of the coating must be checked for all coatings, and the thickness of the coating is the quality of the coating
• Aiming at the detection and screening problems in the process control of surface treatment, product quality inspection and other links in the ironware application, LANScientific provides you with an efficient and intelligent XRF analysis instrument –  INSIGHT 200.

• The INSIGHT coating analyzer uses a micro-focusing X-Ray tube to collect most of the rays from the X-Ray source and focus them into a micro-beam spot, which is irradiated at the sample position, so as to obtain good spatial resolution and strong fluorescence signal

• An adhesive that is compatible with both thermal and UV curing methods;
• One component adhesive is derived from modified epoxy resin, free-bisphenol A, nonylphenols, CFC / HFC, and solvent-free.
• Range of use temperature: -40 ⁰C ~ 180 ⁰C, depending on the certain application;
• Especially for components of the camera module;
• Combined bonding between PC, PPS, FR4 resins, metal with plastic, metal with metal such as Al / Al, steel/steel,… as well as temperature-sensitive components;
• Fast fixation of components and details.

• ^{R3 RotrOil spectrometer instrument is a compact, transportable and easy to use optical emission spectrometer designed specifically to determine trace concentration in wear metals, polluting materials and additives in lubricating oils, transmission and refrigerating liquids.}

DELOLUX 50 / 502 is an excellent choice for quick and precise curing of UV glue with very small, teardrop-style glue dots. With an intensity of up to 12,000 mW/cm², this UV illuminator can give an exposure time of less than one second. Moreover, this device is not only space-efficient but also extremely reliable: Uniform light intensity.

DELOLUX pilot S4T has a compact module form, connects up to 4 lamp heads, for stability and long life (> 20000 h), ensuring safe operation when working with DELOLUX 50 / 502.

DELOLUX pilot AxT has a compact module form, connecting up to 4 lamp heads, for stability and long life (> 20000 h), ensuring safe operation when working with DELOLUX 20/202.

• XD160 is an X-ray machine with a capacity of up to 400W, used to inspect defects inside cast aluminum products, thick samples, large sizes.
• Simple operation, time to install, test and give results about 5-10 minutes.
• The X-ray tube and the Detector are on the C-arm, horizontally, allowing high-height samples to be examined.
• 360 degree rotating sample stage

Damp heat chamber AUTOMATIC for high humidity tests in Constant (CH) and Alternate (AHT, AT) atmosphere to simulates rain and dew by condensing liquid water directly onto the test specimen (high humidity 95% to 100% saturated atmosphere).

Model: D200

Maker: COFOMEGRA - Italia

• The Qmount is a modern device for the light-curing-based mounting of materialographic samples.

The DS 1100 Belt Grinder is ruggedly designed, suitable for grinding Steel samples, providing optimum surface preparation prior to component analysis in the OES - Optical Emission Spectrometer.

• Grinding machine DS 300/2 2-disc, floor-standing, large capacity, sturdy design, suitable for grinding samples of Steel, Cast iron or even Copper, Aluminum Zinc alloys, ... optimal surface preparation in advance when analyzing the composition at the OES - Optical Emission Spectrometer

• LP 3000 Polishing machine for preparation of Ferrous and Non Ferrous spectrometric samples. It is supplied with proper lapping tool accordingly to the alloy of the sample to be prepared (Aluminium, Copper, Cast Iron)

• The EQM-402 Ball Mixer Mill is our great ally when preparing samples for analysis, as it can grind, mix and homogenize quickly small amounts of sample. Especially designed for the final preparation of hard, semihard, and brittle samples – up to 50 ml -. Able to prepare two samples simultaneously and reduce them from an initial grain size of 0,8 to 1,5 mm to a size of less than 10μ in a very short time – 1 to 4 minutes.

• The EQR-200 Vibratory Disc Mill is a grinding unit especially designed to obtain analytical granulometries of a wide variety of samples, such as glass, earth, slag, metallic oxides, ferroalloys, and ceramic materials, amongst many other

• The Equilab Pellet Presses have been especially designed to obtain pellets of great quality finish, with a high level of cohesion and stability, and with very flat, regular and crack free surfaces. The EPQ-1 Manual Pellet Press can exert a pressure of up to 20 tons. It is very easy and safe to use, and takes very little space.

• The EQP-100 Semiautomatic Pellet Press can exert up to 40 tons to prepare Ø 40 mm pellets. With a simple and robust design, this unit is very effective and easy to manage, and offers up to five different working programs of single and double cycle.

• The EQP-200 Semiautomatic Pellet Press can prepare pellets of several diameters and shapes thanks to different pressing tools. Robust and durable, it applies a pressure of up to 40 tons , with five programs of single or double cycle.

• The F1 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures

• The F2 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures.

• The EQJ-100 Jaw Crusher is a crushing unit specially designed for the primary reduction of semi-hard, hard, brittle and tough materials. Able to quickly and efficiently crush glass, earth, slag, metallic oxides, cements and construction materials, ferroalloys, ceramic materials, minerals and stones