Sealant adhesive CIPG DELO PHOTOBOND SL4165

Sealant adhesive CIPG DELO PHOTOBOND SL4165

lien_he

DELO PHOTOBOND SL4165 is a kind of one-component adhesive derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for creating CIPG (Cure In Place Gasket) elastic gaskets for electronic components, battery packs, ..., and sealing flanges and gaps. After curing, the glue has a dry surface and good elasticity.

 

DELO PHOTOBOND SL4165 is a kind of one-component adhesive derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for creating CIPG (Cure In Place Gasket) elastic gaskets for electronic components, battery packs, ..., and sealing flanges and gaps. After curing, the glue has a dry surface and good elasticity.

 

CIPG, FIPG

 

Outstanding features:

  • Using temperature: -40 0 C ~ 120 0 C;
  • Compliant directive RoHS 2015/863/EU.
  • Cures with UV light in seconds.

User manual:

  • The adhesive should be used in a dispensing machine with a needle-tip contact glue nozzle type;
  • Under cold storage conditions (0~10 o C), the glue needs to be naturally thawed to room temperature (~25 o C) before use for at least 30 minutes with a 50 ml and 4 hours for 1000 ml volume.
  • Glue usage time after opening is 30 days (with 50 ml glue bottle and stored at 25 o C);
  • Shelf life (for unopened container ≤50ml, stored at 0~25 o C) is 06 months;

Curing the glue:

  • The glue only cures under the influence of UV light up to the blue light range. Recommend using DELOLUX 20/50/80 UV lamps with wavelengths of 365 and 400 nm.
  • Average curing time (intensity 200 mW/cm 2, LED 400 nm): 6 s;

Reference videos: 

 

Specifications:

- Color (cured adhesive layer 1 mm thick)

: Matte gray

- Density 

: 0.99 g/ cm3

- Viscosity

: 124000 mPas;

- Compression shear strength
 (DELO Standard 5)

Glass/Al, 400 nm, 200 mW/cm2, 10s

: 2 MPa

Glass/Stainless steel, 400 nm, 200 mW/cm2, 20s

: 2 MPa

Glass/PC, 400 nm, 200 mW/cm2, 10s

: 2 MPa

- Tensile shear strength ( 400 nm, 200 mW/cm2, 10s)

: 2 MPa

- Elongation at break (DIN EN ISO 527)

: 170%

- Young's modulus 

: <10 MPa

- Shore A hardness

: 40

- Glass transition temperature

:  -37 oC

- Water absorption

: 0.2 %

- Storage (with unopened container, at 0~10 °C)

: 6 months

Download TDS here: https://www.delo-adhesives.com/us/service-center/downloads/downloads/datasheet/DELO%20PHOTOBOND_SL4165_TIDB-en.pdf?how=1&type=5001&cHash=466a3e7a101e66f2e24dbbb1c2c49513

 

For more detailed information about the product as well as advice on adhesives for your project, please contact HUST Vietnam using the information below on the website!

 

 

Bình luận

HOT

DELO PHOTOBOND AD494 - Glue for glass, PC plastic, transparent

lien_he

  • This is a type of acrylate that can be cured by UV and light, high viscosity, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, etc.
  • Ingredients: modified acrylate, 1-component adhesive, solvent-free, viscous-modified (thixotropic)
HOT

DELO PHOTOBOND UB4086 – Mini Loudspeaker Adhesive

lien_he

Introduce:

  • This adhesive suitable for both curing methods by UV light and by visible light in a short time;
  • It’s just one component base on modified urethane acrylate, high viscosity.
  • Multipurpose, especially for the bonding of membranes and coils in mini loudspeakers;
  • Good adhesion to plastics like PEEK, PEN, PEI, and PAR;
HOT

DELO PHOTOBOND AD491 Adhesive

lien_he

  • This is an adhesive suitable for both curing methods by UV light and by the visible light;
  • It’s just one component base on modified urethane acrylate, high viscosity;
  • Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.
HOT

DELO PHOTOBOND AD441 – Tweeter Membrane adhesive

lien_he

  • This adhesive is suitable with both curing methods by UV light and by visible light;
  • Multipurpose, especially for peel-resistant plastic bondings e.g., bonding of membrane foils into loudspeaker baskets or bonding of coils to membranes.
HOT

Sealant adhesive CIPG/FIPG DELO PB SL4155

lien_he

 PHOTOBOND SL4155 is a one-component adhesive line derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for sealing flange rubber gaskets. After curing, the glue has a dry surface and good elasticity.

HOT

DELO PHOTOBOND 4468 - Metal and Glass Adhesive

lien_he

  • It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
  • Resistant to humidity;
  • Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
  • Compliant RoHS standard 2015/863/EU;
  • Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.
HOT

DELO PHOTOBOND GB368 - Glass Adhesive

lien_he

  • The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
  • UV curing ability in the range from 320 nm to 420 nm;
  • Operating temperature: -40 0 C ~ 120 0 C, depending on the certain application.