DELO-ML adhesive

Introduction:

DELO ML 5198 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, light yellow color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

DELO ML 5298 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, blue color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

• DELO ML 5249 is a sealing glue for all types of bolt-nut threads, low viscosity, blue color, high mechanical properties, and chemical resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

• DELO ML is a group 1- component metal adhesive with high thermal resistance and strength – suitable for electric motor assembly;
• DELO ML allows high thermal resistance, fast curing in anaerobic conditions when contacted to metal ions. DELO ML such as a screw locking adhesive, sealing any thread and surface locking gaps;
• The product is suitable for coaxial metal joints. Using visible light and UV curing glue helps fasteners cure even in hard to reach areas in seconds;
• Ingredients: Modified Urethane acrylate, 1-component glue, solvent-free;
• Operating temperature: - 60 ⁰C ~ +180 ⁰C;
• Compliant RoHS directly 2015/863/EU, and passed anti-flammable test UL 94 HB standard.

- DELO-ML DB133 is a modified acrylate adhesive that cures under anaerobic conditions, especially compatible with metal surfaces, quickly fixed by UV light;

- Cured products are generally used in the temperature range of -40 °C to +150 °C; depending on the application, other limits may be more reasonable;

- Complies with RoHS directive 2015/863/EU;

- Compliant with VOC content limit according to GB33372-2020 regulation.