DELO Industrial Adhesives

High Penetrating Power X-ray Inspection System with CT Variation

Max X-ray Voltage: 40kV to 130kV

Max X-ray Power: 40W

High resolution X-ray camera

• It is an epoxy glue that cures at low temperatures, used for bonding temperature-sensitive sensors, camera modules, etc.
• Adhesive meets halogen-free standards according to IEC 61248-2-21 regulations;
• Meets RoHS 2015/863/EU standards;
• Glue can be dispersed using robot systems with needle tips.
• Operating temperature: -40 0C ~ 150 0C, depending on application;
• Meets volatile organic matter (VOC) content limit standards according to GB33372-2020;
• Meets DIN EN ISO 10993-5: cytotoxicity test.

• This is the glue that is compatible with both UV light and low temperature curing methods (+80^oC);
• The ingredient is just one component based on polycarbaminacid being modified, non-solvent.
• Non-halogen by the criteria of IEC 61248-2-21;
• Compliant with RoHS 2015/863/EU;
• The adhesive is supplied ready to use, to achieve the best performance, it can be dispensed by injection systems or use metal injection needles.

Car Lamp Condensation Tester

Model: TMJ-9812

Maker: T-Machine / Taiwan

Model: TMJ-9714

Maker: T-Machine / Taiwan

Introduction:

DELO ML 5198 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, light yellow color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

DELO ML 5298 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, blue color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

• DELO ML 5249 is a sealing glue for all types of bolt-nut threads, low viscosity, blue color, high mechanical properties, and chemical resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Model: THV Series

Manufacturer: Sentek - USA

Model: ASP Series

Manufacturer: Digitech - Japan

Model: STP Series

Manufacturer: Digitech - Japan

Model: ASP Series

Manufacturer: Digitech - Japan

Model: ASM-1000

Manufacturer: Digitech - Japan

Model: AFS-2000

Manufacturer: Digitech - Japan

Model: DTG Series

Manufacturer: Digitech - Japan

 PHOTOBOND SL4155 is a one-component adhesive line derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for sealing flange rubber gaskets. After curing, the glue has a dry surface and good elasticity.

DELO-DUOPOX SJ8665 is a 2-component adhesive, derived from modified epoxy resin, cured at room temperature (accelerated when heated to +80^oC), temperature resistant up to +180^oC, and under packaging dual-bottles that compatible with Automix dispenser.

Light Soaking Chamber TMJ-9769

Model: TMJ-9769

Maker: T-Machine / Taiwan

Xenon–Arc Weather Chamber TMJ-9707

Model: TMJ-9707

Maker: T-Machine / Taiwan

DELOMAT 101 dispenser for high precision glue dispersion in the laboratory scale. 

Suitable for Lab of the R&D department in the industry. 

The device is really compact, small, slight, easy to use, and compatible with a wide range of single-component adhesive lines that from very low viscosity to pasty.