1. Home
  2. Non-destructive test instruments
  3. Probes & Coils

Probes & Coils

Probes & Coils (4 Product)

Sort
HOT
Coils for structure tests

Coils for structure tests

lien_he
  • The proper solution for each test task: Our wide range of standard accessories includes encircling coils, rectangular coils, inner diameter coils, flat coils and probes. Customised products for special test tasks are provided by our in-house design and manufacturing departments. ibg coils stand out due to highest test sensitivity and temperature stability. Furthermore, they offer a maximum of investment security as they may be operated with all ibg structure test instruments. So you can replace an old ibg test instrument by a new generation instrument, and the coils can still be used.
HOT
Probes for crack and grinder burn detection

Probes for crack and grinder burn detection

lien_he
  • ibg is able to combine very high flaw signal amplification with very low noise signal processing allowing production-capable distances between test probe and test surface without loss of test sensitivity
HOT
Rotating heads for crack and ginder burn detection

Rotating heads for crack and ginder burn detection

lien_he
  • The eddy current test method has established itself for years with 100% crack detection of cylindrical parts. Main reasons are the always reproducible and non-destructive method as well as the excellent chance of automation of that test. Rotating systems increase the productivity tremendously.
Test box for the testing of cams and camshafts

Test box for the testing of cams and camshafts

lien_he
  • Grinding processes on camshafts are as a matter of principle difficult and can regularly cause residual stress conditions exceeding the specified rate or even cause grinder burn defects like annealing or re-hardening zones in the area of the ramp or the nose.
  • Crack formation cannot be excluded when producing composite camshafts where single cams are either shrunk by temperature effect on the shaft or joined under pressure. Where in the past the structure conditions from the heat treatment process was often 100% inline tested by means of eddy current, nowadays the focus of interest is more and more a non-destructive 100% test for cracks and grinder burn.