S7 MLP, the most suitable solution for your Laboratory

S7 Metal Lab Plus combines ease of use and high accuracy of results.

SMT/Semiconductor/Solar/Connector/LED

High-definition image: Slanting/Bridge/Voids/Cold Solder/Bonding wire

100KV 3um (130 KV Optional)closed X-ray tube,long life time,maintenance in free

2.3 mllion high resolution digital flat panel detector

60 degrees observation

Platform 360° rotation

Introduction:

DELO ML 5198 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, light yellow color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

DELO ML 5298 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, blue color, good solvent resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

Introduction:

• DELO ML 5249 is a sealing glue for all types of bolt-nut threads, low viscosity, blue color, high mechanical properties, and chemical resistance;

• DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
• Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
• Compliant with RoHS directive 2015/863/EU.

• The EQM-402 Ball Mixer Mill is our great ally when preparing samples for analysis, as it can grind, mix and homogenize quickly small amounts of sample. Especially designed for the final preparation of hard, semihard, and brittle samples – up to 50 ml -. Able to prepare two samples simultaneously and reduce them from an initial grain size of 0,8 to 1,5 mm to a size of less than 10μ in a very short time – 1 to 4 minutes.

• DELO ML is a group 1- component metal adhesive with high thermal resistance and strength – suitable for electric motor assembly;
• DELO ML allows high thermal resistance, fast curing in anaerobic conditions when contacted to metal ions. DELO ML such as a screw locking adhesive, sealing any thread and surface locking gaps;
• The product is suitable for coaxial metal joints. Using visible light and UV curing glue helps fasteners cure even in hard to reach areas in seconds;
• Ingredients: Modified Urethane acrylate, 1-component glue, solvent-free;
• Operating temperature: - 60 ⁰C ~ +180 ⁰C;
• Compliant RoHS directly 2015/863/EU, and passed anti-flammable test UL 94 HB standard.

• DELO-QUICK activator is composed of activators, promoters, initiators of the curing polymer reaction of the adhesive. Mainly used for DELO-ML glue line, metal glue, or for surfaces that have been passivated, plated with anti-rust alloy, difficult to bond plastic surfaces such as PA, PPT, ...
• The main ingredients include solvents and activators, spray bottles, quick evaporation, less toxicity to the environment and users.

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

DELO-XPRESS 905 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 200 ml side-by-side glue cartridges and 1:1 and mixing ratio 1:2. This is a larger version of DELO-XPRESS 903, for larger volume glue bottles and for applications where large areas of adhesive are required.

The gun uses compressed air to help apply the glue accurately, without the glue falling due to residual stress like other manual guns. The force acting on the trigger lever is very small, and the weight of the gun is quite light, the design does not cause hand fatigue while applying the glue.

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.