- This adhesive suitable for two curing methods includes visible light and humidity within seconds. It has high viscosity with one component, solvent-free base on modified acrylate, and has thixotropic.

- Especially suitable for peeling resistant bonding of membranes and coil in mini loudspeaker;

- Multipurpose for plastic/plastic, glass/plastic, metal/plastic, glass/glass, and glass/metal bondings;

• As a glue compatible with both heat and UV curing, it has low air release, low shrinkage, and low CTE;
• Ingredients: modified epoxy resin, 1-component glue, solvent-free;
• High viscosity, catalytic properties (Thixotropy);
• Used for bonding between materials such as metal, glass, plastic as well as casting, fixing, or mounting around electronic components;
• Operating temperature: -40 ⁰ C ~ 150 ⁰ C, depending on the application;
• RoHS compliant 2015/863/EU, Halogen-free according to IEC 61249-2-21;
• Meets the VOC limit for adhesives according to the GB33372-2020 regulation.

• This is a type of acrylate that can be cured by UV and light, high viscosity, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, etc.
• Ingredients: modified acrylate, 1-component adhesive, solvent-free, viscous-modified (thixotropic)

• This is an adhesive suitable for both curing methods by UV light and by the visible light;
• It’s just one component base on modified urethane acrylate, high viscosity;
• Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.

• DELO-GUM is a one-component, solvent-free, heat-resistant base on modified silicone adhesive (RTV-1 Heat Resistant Silicone) used in a wide range of adhesive and sealing applications;
• The heat resistance of DELO-GUM glue is usually from -50 to +180 ^oC, especially DELO-GUM 3699 glue can withstand heat up to 300 ^oC;
• DELO-GUM is widely used in bonding metal, plastic, rubber, glass, and many other materials;
• All products meet RoHS standards according to directive 2015/863/EU.

• The EQR-200 Vibratory Disc Mill is a grinding unit especially designed to obtain analytical granulometries of a wide variety of samples, such as glass, earth, slag, metallic oxides, ferroalloys, and ceramic materials, amongst many other

• The F1 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures

• The F2 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures.

• The EQJ-100 Jaw Crusher is a crushing unit specially designed for the primary reduction of semi-hard, hard, brittle and tough materials. Able to quickly and efficiently crush glass, earth, slag, metallic oxides, cements and construction materials, ferroalloys, ceramic materials, minerals and stones

• DELO-PUR9694 is multi-purpose, bonding glass/metal, PBT, PET, and many other materials.
• Fix components with passivation surfaces (Ferrite, PBT, Al, PET foil), such as coils, capacitors, and plugs, etc. on the FR4 printed circuit board to prevent vibration;
• The glue has a good resilience to the touch, high strength for both static and dynamic loads, good response to large gaps due to its ability to resist vibration during operation.

• It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
• Resistant to humidity;
• Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
• Compliant RoHS standard 2015/863/EU;
• Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.

• The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
• UV curing ability in the range from 320 nm to 420 nm;
• Operating temperature: -40 ⁰ C ~ 120 ⁰ C, depending on the certain application.