DELOMAT 101 High Precision Dispenser | HUST VN

DELOMAT 101 High Precision Dispenser

lien_he

DELOMAT 101 dispenser for high precision glue dispersion in the laboratory scale. 

Suitable for Lab of the R&D department in the industry. 

The device is really compact, small, slight, easy to use, and compatible with a wide range of single-component adhesive lines that from very low viscosity to pasty.


Introduce:

DELOMAT 101 dispenser for high precision glue dispersion in the laboratory scale. Suitable for Lab of the R&D department in the industry. The device is really compact, small, slight, easy to use, and compatible with a wide range of single-component adhesive lines that from very low viscosity to pasty.

delomat 101..2

Application:

  • Bond small details such as microchips PCBs, micro switches, smartphone camera components;
  • Bond electronic components, semiconductors, sensor assemblies;
  • Bond details on the mini camera, ...

Some outstanding features of the product:

- Glue dispersion is controlled by pneumatic pressure and setting time;

- Does not drop formation when stopping thanks to the retention vacuum feature;

- Can be programmed for fully automatic control by PLC;

- Compact design, requires small working space;

- Long shelf life, the details are made of stainless steel;

- Can optionally add a heater for the glue cartridge, making it easy to dispense the glue with high viscosity;

- No need for regular maintenance, no consumable parts, reduce downtime costs;

- Easy to operate by navigation keys and parameters are showed display.

- Types of dispersible solutions: glues, coatings, encapsulant soldering paste, greases, ...

Technical parameters:

Control

Foot switch, finger switch, PLC

Operation mode

Time-controller / continuous operation

Viscosity of the glue / solution

From 0.1 to 100000 (mPa.s)

Cartridge heater

Optionally available

Adjustable time ranges

0.01 ~ 640 s

Adjustable pressure range

0.01 ~ 6.0 bar (0.05 bar resolution)

Retention vacuum

Yes

Power supply

Primary: 100 ~ 240 V AC, 1.0A, 50 ~ 60 Hz

Secondary: 24V DC, 1.5A

Weight

1.2 kg

Dimensions (Width x Depth x Height)

153 x 195 x 64 mm

 

Contact us for more information.

HUST Vietnam is proud to be the exclusive distributor of adhesive products, dispensing, curing technology, and technology transfer from DELO in Vietnam!

 

Bình luận

HOT

Dispensing adhesive equipment - DELO FLEXCAP

lien_he

Dispensing without bubble, not jam with DELO FLEXCAP – smart valve!

DELO FLEXCAP is a close valve, operate by the elastomeric membrane. It replaces for normal piston, thus, this is a perfect method to store, move, and dispense glue without bubble – help dispense exactly adhesive amount.

HOT

Pneumatic, Microdispensing Valve - DELO-DOT PN3

lien_he

  • This is the new version Microdispensing Valve adhesive!
  • Advantage of DELO-DOT PN3 than other valves: dispensing adhesive without nozzle, not contact. Therefore, this equipment allows dispensing super small adhesive amount, prevent the impact of the valve with the material surface. Besides, no necessary to move the valve follow the z-axis during operation.
HOT

DELOMAT 100 pneumatic dispensing system

lien_he

The DELOMAT 100 pneumatic dispensing system includes 3 main parts: the DELOMAT 100 Controller, the DELO-XPRESS 951 (NK) Pressure Tank, and the Pinch Valve.

The device has a simple structure, is easy to install, and can be applied directly by hand or attached to the robot arms for automatic control.

Compatible with DELO glue bottles up to 1 liter volume. In addition, it can be used to spray surface cleaning solutions before applying glue.

HOT

DELO-XPRESS 903 Dispensing Gun for 2C adhesive 50ml

lien_he

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

HOT

DELO-XPRESS 905 Dispensing Gun for 2C adhesive 200ml

lien_he

DELO-XPRESS 905 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 200 ml side-by-side glue cartridges and 1:1 and mixing ratio 1:2. This is a larger version of DELO-XPRESS 903, for larger volume glue bottles and for applications where large areas of adhesive are required.

The gun uses compressed air to help apply the glue accurately, without the glue falling due to residual stress like other manual guns. The force acting on the trigger lever is very small, and the weight of the gun is quite light, the design does not cause hand fatigue while applying the glue.

 

HOT

DELO-XPRESS 907 Dispensing Gun for 2C adhesive 50ml

lien_he

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

HOT

DELO-XPRESS 902 Dispensing Gun for two components adhesive

lien_he

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.

HOT

DELO-DOT PN5 pneumatic jet valve - high performance!

lien_he

DELO-DOT PN5 - A new high-performance micro dispensing valve that can reproduce dispensing results at a dispensing frequency of up to 300 Hz. The plunger speed reaches twice the maximum value of its predecessor, DELO-DOT PN3.

This pneumatic jet valve is easy-to-use and features tool-free maintenance of its fluid system. Its compact design allows for easy integration into production systems.

The DELO-DOT PN5 offers a contactless application preventing collisions between the dispensing valve and the component. High-viscous materials and difficult media can be dispensed accurately, precisely, and reliably.