Introduction:
DELO ML 5298 is a seal threaded pipe thread adhesive, all gaps sealed, screw lock, thread lock, light yellow color, good solvent resistance.
- DELO ML allows high-temperature resistance, curing quickly under anaerobic conditions when contact with metal ions;
- Ingredients: one component adhesive, derived from the modified methacrylate ester, non-solvent;
- Compliant with RoHS directive 2015/863/EU.
Applications:
- Sealing metal surfaces, tubeless tire rims for motorbike or car, seal solvent pipeline thread,…;
- High viscosity, help to run-resistant;
- Low strength to easy to remove adhesive;
- Range of temperature to use: 600C ~ 1800C, (Depended to the certain application may be other limited);
- The surface to bond must be clean, no dust, grease as well as other contaminations, use DELOTHEN cleaner to best bonding.
- To acceleration curing speed, it is possible to heat addition or use DELO-QUICK.
Curing:
- Anaerobic curing at room temperature, under metal surface catalyst, initial curing after several minutes and finally cured within 24h;
- The curing may be assisted by heat addition or activator as DELO-QUICK,…
Technical data:
- Color: blue, prefer clearance: 0.05 ~ 0.1 transperant up to 0.4 mm if heat addition or be activated;
- The gap distance when applying heat or condensative activator: up to 0.3~0.4 mm;
- Density: 1.1 g/cm3;
- Viscosity: pasty;
- Curing time until initial strength: at 23oC, anaerobic:
+) on zinc phosphated screw: 5~10 min;
+) on V2A steel screw: 5~15 min;
- Curing time until final strength: 24h;
- Off-toque:
+) without M(on): 14 Nm;
+) with M (on) =46 Nm: 50 Nm;
- Compression shear strength: 15 MPa;
- Compression shear strength after 1 hour cured: ~12 MPa;
- Tensile shear strength St/St: ~ 3 MPa;
- Chemical resistant: very good;
- Storage life: 12 months, at room temperature (max. 25oC), with unopened original cartridge up to 600 ml.
For more information, please contact us.
HUST is proud to be the exclusive distributor of adhesive products, dispensing, adhesive curing systems, and technology transfer from DELO in Vietnam!
