Advantage
- Blue backlit LCD panel having excellent visibility in compression and tension spring load testing machine employed and also the positioning and the like can be performed smoothly with the adoption of Jagged shuttle dial in operability, even pressure test manual you can easily with your fingertips.
- Since it has built-in high-speed printing printer in the standard it is possible to print out aggregate data also instantly based on the important test results and standards value setting.
- The external connection even when connection with the adopted USB1.1 PC has made possible high-speed data communication.
- Capture the data to the PC in real time at the option of the software, it can waveform drawing and data analysis.
Specification
| Model | ASP-1/ASP-1S | ASP-5/ASP-5S | ASP-10/ASP-10S | ASP-50/ASP-50S |
| Capacity | 10N (1kgf) | 50N (5kgf) | 100N (10kgf) | 500N (50kgf) |
| Load resolution | 0.1mN (0.01gf) | 1mN (0.1gf) | 10mN (1gf) | |
| Displacement resolution | 0.01 mm | |||
| Test speed | 1～600mm/min | |||
| Max. test length | 210 mm | |||
| Anvil diameter | 20Φ | 60Φ | 60Φ | 60Φ |
| Standard | JIS B 7738 (class 0.5) | |||
| Transportation | Precise ball screw / servo motor | |||
| Safe mode | Mechanical limit stop / Over load stop / emergency stop SW | |||
| Interface | USB 1.1 | |||
| Dimension | W450×H570×D350 | |||
| Weight | 45 Kg | |||
| Power supply | AC 220V hoặc 110V | |||
Characteristic
- To load measurement of the compression spring, tension spring, the disc springs are supported.
- It is possible to measure point setting of up to five stages.
- It is possible to measure the set point load, free height, the initial tension, adhesion height and maximum value.
- High-speed printing printer in c built-in measurement result it is possible to be printed instantly.
- You can the average value measured by the length setting measurement and deflection setting measurement and round trip measurement.
- Calls once set measurement conditions are also at the scene to measure the spring of multi-breed can be part number registration can be done immediately test.
- Aggregate functions can be standard value setting also provides so such as pass-fail number of articles and process capability index, you can grasp at a glance.
- Four languages of Japanese, English, Chinese, Korean is switched at any time it can be used.
- You can length measurement and deflection measurement by the load setting (standard on S models)
- During one of the test in the complex measurement mode equipped for composite test of displacement measurement and load measurement. (Standard on S models)
 | Equipped with two of the functions of the length settings and the amount of deflection setting. In addition, in the compression test is possible to measure the height and load value at the time of contact of the spring. |
 | The displacement settings and load setting and complex in any order can be set and measurement of up to 5 points. (S model). |
 | Also jewels Hall with compression board for the measurement of the spring can not be self-supporting |
