Advantage
- It is a torsion spring testing machine with an emphasis on ease of use.
- Complex angle calculation by simply selecting and enter the basic conditions can also be immediately tested by simply setting according to the instructions of all mobile computing and screen.
- Capture the data to the PC in real time at the option of the software, it can waveform drawing and data analysis.
- Torsion spring set point load value-torque value and the free angle (center angle and the outer peripheral corner) it can be measured.
- It is possible to measure point setting of up to five stages.
- Can be set measuring the deflection and angle setting measurement, it can also mean value measurement by the round trip measurement.
- High-speed printing printer built-in measurement result it is possible to be printed instantly.
- Calls once set measurement conditions are also at the scene to measure the spring of multi-breed can be part number registration can be done immediately test.
- Aggregate functions can be standard value setting also provides so such as pass-fail number of articles and process capability index, you can grasp at a glance.
- Four languages of Japanese, English, Chinese, Korean is switched at any time it can be used.
- In addition to the direction of the test to close the angle, and a direction of the test set mode to widen the angle. (Standard on S models)
Specification
Model | STP-5 / STP-5S | STP-10 / STP-10S | STP-50 / STP-50S |
Load resolution | 50N(5kgf) | 100N(10kgf) | 500N(50kgf) |
Force unit | N,gf | N,gf | N,kgf |
Torsion unit | Nmm,Ncm,Nm / gfmm,gfcm,gfm | Nmm,Ncm,Nm / gfmm,gfcm,gfm | Nmm,Ncm,Nm / kgfmm,kgfcm,kgfm |
Torsion resolution | 0.001Nmm | 0.001Nmm | 0.01Nmm |
Measurement angle | 0.1~720.0 deg. | ||
Test speed | 10~180 độ / min | ||
X-AXIS | ±25mm | ||
Y-AXIS | 60mm | ||
Z-AXIS | 80mm | ||
Standard | JIS B 7738 class 0.5 | ||
Transportation | AC servo motor | ||
Safe mode | Mechanical limit stop / Over load stop / emergency stop SW | ||
Interface | USB1.1 | ||
Dimension | W490×H620×D490 | ||
Weight | approx. 65kg | ||
Power supply | AC 100 or 220V |
Other functions
Graphic display the size input of the spring of each pattern based on the basic condition setting. Because that can be entered while in light of the accompanying drawings and the graphic display, also prevents clearly set miss anyone. | |
Equipped with an angle switching of central angle test and the peripheral angle test. | |
Equipped with two of the functions of the angle setting and the amount of deflection setting. | |
General angle in addition to and go direction of the test to close the also corresponds to the test of the direction to expand the angle (S model) | |
Operation Panel You can choose from Japanese and English versions. Monitor display by key operation regardless of the type of your designated operation panel, Japanese, English, Chinese, you can use to switch to any at any time a Korean. |