DELO Industrial Adhesives

• DELO-PUR9694 is multi-purpose, bonding glass/metal, PBT, PET, and many other materials.
• Fix components with passivation surfaces (Ferrite, PBT, Al, PET foil), such as coils, capacitors, and plugs, etc. on the FR4 printed circuit board to prevent vibration;
• The glue has a good resilience to the touch, high strength for both static and dynamic loads, good response to large gaps due to its ability to resist vibration during operation.

• It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
• Resistant to humidity;
• Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
• Compliant RoHS standard 2015/863/EU;
• Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.

• The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
• UV curing ability in the range from 320 nm to 420 nm;
• Operating temperature: -40 ⁰ C ~ 120 ⁰ C, depending on the certain application.

• Two-component, room-temperature-curing, high-viscosity polyurethane adhesive allowing use in closed die-casting applications;
• Meets RoHS 2015/863/EU and UL 94 HB standards;
• Compliant DIN EN ISO 10993-5 biocompatibility test: cytotoxicity test.

• DELO-DUOPOX TC8686 (TC=Thermal Conductive) is a 2-component adhesive, base on modified epoxy resin, that cures at room temperature for 168h but will accelerate to cure within 1h when heated to +80 ^oC. It is developed for the application of Lithium battery pack bonding application to heat sinks for batteries in electric vehicles.
• - Compliant RoHS certified according to directive 2015/863/EU;
• - Passed ANSI/UL 94 V-0 Flammability Test

• DELO ML is a group 1- component metal adhesive with high thermal resistance and strength – suitable for electric motor assembly;
• DELO ML allows high thermal resistance, fast curing in anaerobic conditions when contacted to metal ions. DELO ML such as a screw locking adhesive, sealing any thread and surface locking gaps;
• The product is suitable for coaxial metal joints. Using visible light and UV curing glue helps fasteners cure even in hard to reach areas in seconds;
• Ingredients: Modified Urethane acrylate, 1-component glue, solvent-free;
• Operating temperature: - 60 ⁰C ~ +180 ⁰C;
• Compliant RoHS directly 2015/863/EU, and passed anti-flammable test UL 94 HB standard.

• DELO-QUICK activator is composed of activators, promoters, initiators of the curing polymer reaction of the adhesive. Mainly used for DELO-ML glue line, metal glue, or for surfaces that have been passivated, plated with anti-rust alloy, difficult to bond plastic surfaces such as PA, PPT, ...
• The main ingredients include solvents and activators, spray bottles, quick evaporation, less toxicity to the environment and users.

- Specialized glue in gluing electronic components, smartphone camera modules, automotive cameras, ...

- Adhesive to a variety of materials such as glass, aluminum, PC plastic, FR4, GF30, ...

- Ingredients: derived from modified polycarbamin acid, a 1-component glue, no solvents;

- Use in temperature range: -40 ⁰ C ~ 130 ⁰ C, depending on the application; 

- Compliant RoHS standard 2015/863/EU;

- Does not contain halogen elements according to IEC 61249-2-21;

- Compliant with the VOC content limit according to GB33372-2020 regulations;

The DELOMAT 100 pneumatic dispensing system includes 3 main parts: the DELOMAT 100 Controller, the DELO-XPRESS 951 (NK) Pressure Tank, and the Pinch Valve.

The device has a simple structure, is easy to install, and can be applied directly by hand or attached to the robot arms for automatic control.

Compatible with DELO glue bottles up to 1 liter volume. In addition, it can be used to spray surface cleaning solutions before applying glue.

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

DELO-XPRESS 905 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 200 ml side-by-side glue cartridges and 1:1 and mixing ratio 1:2. This is a larger version of DELO-XPRESS 903, for larger volume glue bottles and for applications where large areas of adhesive are required.

The gun uses compressed air to help apply the glue accurately, without the glue falling due to residual stress like other manual guns. The force acting on the trigger lever is very small, and the weight of the gun is quite light, the design does not cause hand fatigue while applying the glue.

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.

• Suitable for removing epoxy, acrylate adhesives when they have not been fully cured. Especially specialized for PHOTOBOND glue line, DUALBOND acrylate.
• The composition does not contain volatile substances harmful to the environment CFC/FC, safe for users.
• Bottled in 1000ml cans or 500ml aerogel spray bottles for convenient use.

• It is a transparent, solvent-free, low-viscosity, flowable, modified epoxy adhesive with fully curing by light.
• Halogen-free according to IEC 61249-2-21;
• Compliant RoHS 2015/863/EU standard.
• Specialized in bonding optical materials, imprint materials.

DELO DUALBOND IC343 is an isotropic electrically conductive adhesive by adding conductive silver particles (Ag) to the glue, so the glue has very high conductivity, the volume resistance is only about 0.1 mOhm.cm. IC343 glue has many advantages such as: 

• Glue is derived from modified polycarbamine acid, 1 component, no solvent.
• The glue can be quickly fixed by light in just a few seconds, then cured at a low temperature.
• Glue is thixotropic, anti-creep when applying glue.
• Compliant with RoHS 2015/863/EU standard;
• Halogen-free according to IEC 61249-2-21;
• Compliant with VOC volatile organic matter content limits according to GB33372-2020.

DELO DUALBOND IC4753 is an isotropic electrically conductive adhesive by adding conductive silver particles (Ag) to the glue, so the glue has very high conductivity, the volume resistance is only about 0.1 mOhm.cm.

• Solvent-free, 1-component, modified acrylate adhesive;
• Glue has catalytic properties, prevents sagging when applying glue;
• The glue can be quickly fixed by UV light in just a few seconds, and then dried at low temperature;
• Compliant with RoHS 2015/863/EU standard;
• Halogen-free according to IEC 61249-2-21.

- DELO-ML DB133 is a modified acrylate adhesive that cures under anaerobic conditions, especially compatible with metal surfaces, quickly fixed by UV light;

- Cured products are generally used in the temperature range of -40 °C to +150 °C; depending on the application, other limits may be more reasonable;

- Complies with RoHS directive 2015/863/EU;

- Compliant with VOC content limit according to GB33372-2020 regulation.

• For entry into the eddy current structure test, we offer a digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT) and Simultaneous Harmonic Analysis.
• Eddy current testing for material properties such as hardness, case depth, case depth pattern, structure, tensile strength, heat treatment or alloy.

• A state-of-the art digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT) and Simultaneous Harmonic Analysis.
• Eddy current testing for material properties such as hardness, case depth, structure, tensile strength, heat treatment or alloy.