DELO KATIOBOND OM6113 Adhesive for fresnel lens | HUST VN

DELO KATIOBOND OM6113 Adhesive for fresnel lens

lien_he

  • It is a transparent, solvent-free, low-viscosity, flowable, modified epoxy adhesive with fully curing by light.
  • Halogen-free according to IEC 61249-2-21;
  • Compliant RoHS 2015/863/EU standard.
  • Specialized in bonding optical materials, imprint materials.

Introduce:

  • It is a transparent, solvent-free, low-viscosity, flowable, modified epoxy adhesive with fully curing by light.
  • Halogen-free according to IEC 61249-2-21;
  • Compliant RoHS 2015/863/EU standard.
  • Specialized in bonding optical materials, imprint materials.

OM6113

Application:

  • Specialized in optical materials such as lenses in replicative processing.
  • Bonds temperature-sensitive materials.

 

Curing:

Suitable wavelength:

365 nm

UV intensity:

200 mW/cm2

Irradiation time:

30 s

 

Specifications:

Processing 

Typical dispensing 

 Needle dispensing

Defrost waiting time

1 hour for glue cartridge ≤ 50 ml

Heat annealing time (helps increase transparency)

1 hour at 120 o C

Wait time for cooling the mold after annealing:

Mandatory to avoid cracking for demolding

Technical parameters

Colour:

Colorless, transparent

Density:

1.13 g/cm3

Viscosity (at 23 ° C, Rheometer measurement, speed 10 1/s):

400 mPas

Maximum cured glue thickness:

4 mm

Compression shear strength

glass/glass

20 MPa

glass/PC

12 MPa

Glass/Al

20 MPa

Tensile strength:

23 MPa

Elongation at tear:

70 %

Young's modulus:

800 MPa

Shore D hardness:

60

Glass transition temperature:

410C

Decomposition temperature:

2860C

Coefficient of thermal expansion

Range -40 ~ 0 o C

91 ppm/K

Range 90 ~ 170 o C

207 ppm/K

Shrinkage:

2.6 % vol.

Water Absorption:

0.9 % wt.

Số Abbe (Refractometer):

55

Shelf life (with unopened container):

- 6 months at 0 ~ 25 0 C

- 9 months at 0~10 o C

  

For more detailed information, please contact us.

HUST Vietnam is proud to be the exclusive distributor of adhesive products, dispensing and curing systems, and technology transfer from DELO in Vietnam!

 

 

Bình luận

DELO KATIOBOND KB554 Sealing microswitch Adhesive

lien_he

  • This adhesive is suitable with curing methods by UV light and can be activated by visible light;
  • Multipurpose, especially for tensile-equalizing bonding and sealing, in particular in the case of high-temperature fluctuations at the component.
HOT

DELO KATIOBOND LP655 solar panel adhesive

lien_he

  • Specialized in optical materials such as adhesion between the base layer of solar panels and the outer protective PE film, helping to create flexibility and flexibility for thin film solar panels.
  • Bonding of temperature-sensitive materials.