eddyliner® S Eddy Current Tester Description
The eddyliner® digital S eddy current tester distinguishes itself with compact design and concentration on one channel structure applications with one coil at one location combining that with the well-known ibg test reliability and ease of operation. The ergonomic interface facilitates intuitive and simple operation via touch screen. All functions and test results are captured at a glance.
The eddyliner® is based on the ibg system concept proven for decades. All eddy current coils and probes of the ibg system family can be used. The eddyliner® is therefore recommended not only for the solution of new tasks but also as an upgrade for existing installations to be equipped with state-of-the-art eddy current technology.
Digital processing of the measuring signal with special processors immediately after the pre-amplifier guarantees highly stable test results.
Calibration with ibg’s unique “good-part-only-concept” enables setup within a few minutes true to the motto: “Do you still calibrate or are you already testing?” An adequate number of good parts is recorded as reference parts. From the eddy current signals tolerance zones are automatically generated encompassing the metallurgical magnetic fi ngerprint of the group of good parts for all PMFT test frequencies. After recording of good parts, testing can be immediately started. Faster starting yet more reliable eddy current testing is not possible.
General:
- Tolerance zones
When recording material data the eddyliner® automatically generates elliptical tolerance zones for a reliable test. A tolerance zone editor is integrated for special applications enabling the skilled user to freely define the zones in rectangular or elliptical form. - Harmonic analysis
In addition to the eight fundamental test frequencies, two harmonics (2nd to 9th harmonic selectable) for each test frequency can be turned on and simultaneously evaluated without increasing the test time. - History
The ibg multi-colored histogram displays the test results of all reference data. The last 100 bad parts and up to 1,000 good parts can be observed at a glance and evaluated later, an essential function when reference parts are first recorded and afterwards crosschecked in the laboratory. Questionable NG parts, later found to be good, can be added to the reference parts with one keystroke. - Display
Test results are shown as bargraph, single ellipse or multiple ellipses, selectable
- Coils
A multitude of encircling coils up to a diameter of 500 mm as well as structure test probes are available for standard applications. Customized coils (i.e. ID coils and rectangular coils) for special applications are designed and manufactured in-house. Test coils may be connected either as ibg recommended compensating pair of coils or as self-compensating single coil. Monitoring of coil and cable failure as well as a 50/60 Hz noise suppression can be activated. - Activating test
Start of test can be manually at touch screen, via PLC or optional start button. There is an autostart function that detects the part in the test coil and activates testing immediately or after an adjustable delay time. - Test speed
High speed testing within milliseconds. Using eight test frequencies, a cycle rate up to seven parts per second with encircling coils and 25 parts with probes can be realised with standard settings. - Part types
100 part types with all settings and reference data can be stored in the device memory and switched over manually or via PLC for automated processes. - Data storage and transfer
Test results, part types and device settings are stored internally on a robust flash memory and can be exported via an USB stick or Ethernet connection. A ring buffer logfile records all actions and allows fast debugging for service purpose. - Automation with PLC
Direct control of sorting devices, paint marking systems or indicating lamps is possible with the integrated 24 V DC (2.5 A) power supply, providing a low-cost solution for small automated systems without an additional PLC - Remote control.
The eddyliner® is remotely operable by every network computer via VNC viewer software. - Access protection
The instrument provides a multilevel access authorization concept that operates by pin code. - Help function
The user always has access to a context sensitive help function on the device screen which often renders a look into the manual unnecessary. - Languages
Included are: German, English, Spanish, French, Italian, Czech, Polish, Portuguese, Chinese, Hungarian, Japanese, Korean and Russian. Other languages as option. - Screen
Tough 10.2” TFT touch screen, color display, resolution 1,024 x 768 pixel, operable with gloves
Housing
- completely sealed and thus can be used in a dusty production environment
- desktop housing, inclinable by folding feet
- 19” rack installation as option
Connections
- IO-Ports
optically isolated interface for PLC connection with 32 inputs and 32 outputs - Network
Gigabit Ethernet network interface - Printer
Commercially available printers may be connected via USB 2.0 or Ethernet to printout test results - XVGA
PXVGA interface allows connection to a monitor or projector, an essential feature for training courses.
