DELO PHOTOBOND AD491 | Adhesive for glasss bonding | HUST VN

DELO PHOTOBOND AD491 Adhesive

lien_he

  • This is an adhesive suitable for both curing methods by UV light and by the visible light;
  • It’s just one component base on modified urethane acrylate, high viscosity;
  • Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.

Introduce:

  • This adhesive suitable with both curing methods by UV light and by the visible light;
  • It’s just one component base on modified urethane acrylate, high viscosity.

Application range:

  • Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass;
  • Easy to cure by both UV and visible light for components which are difficult to transmit;
  • Temperature range for use of -40 ~ +120 oC, depending on the application, other limits may be reasonable;
  • Compliant with RoHS directive 2015/863/EU;

Curing:

  • Curing with UV light or visible in a wavelength range of 320 ~ 420 nm;
  • Dependent on materials thickness and absorption, adhesive layer thickness, lamp type, and distance irradiation, curing parameters may change;
  • Reference standard wavelength of DELOLUX 20/50/80 lamps.

Lamp type

DELOLUX 20/50/80

Wavelength (nm)

365

400

460

Suitable

++

++

-         

Note:++ especialy suitable, + suitable,  - not suitable

 Technical data:

  • Color: colorless translucent;
  • Density: 1.1 g/cm3;
  • Viscosity: 90000 mPas;
  • Minimal curing time (with UVA, intensity: 60 mW/cm2) : 7 s;
  • Surface: tacky;
  • Compression shear strength glass/glass: 25 MPa;
  • Compression shear strength glass/Al: 25 MPa;
  • Compression shear strength glass/stainless steel: 28 MPa;
  • Compression shear strength glass/PC: 18 MPa;
  • Compression shear strength glass/PMMA: 8 MPa;
  • Compression shear strength PC/PC: 28 MPa;
  • Compression shear strength PC/Al: 14 MPa;
  • Compression shear strength PMMA/PMMA: 12 MPa;
  • Tensile strength: 12 MPa;
  • Elongation at tear: 150 %;
  • Young’s modulus: 400 MPa;
  • Shore hardness D: 63;
  • Glass transition temperature: 100 oC;
  • Shrinkage: 7.5 (vol. %);
  • Water absorption: 1.0 wt %;
  • Storage life (from +18 to 25 oC in unopened original container): 6 months.

Bình luận

HOT

DELO PHOTOBOND AD494 - Glue for glass, PC plastic, transparent

lien_he

  • This is a type of acrylate that can be cured by UV and light, high viscosity, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, etc.
  • Ingredients: modified acrylate, 1-component adhesive, solvent-free, viscous-modified (thixotropic)
HOT

DELO PHOTOBOND UB4086 – Mini Loudspeaker Adhesive

lien_he

Introduce:

  • This adhesive suitable for both curing methods by UV light and by visible light in a short time;
  • It’s just one component base on modified urethane acrylate, high viscosity.
  • Multipurpose, especially for the bonding of membranes and coils in mini loudspeakers;
  • Good adhesion to plastics like PEEK, PEN, PEI, and PAR;
HOT

DELO PHOTOBOND AD441 – Tweeter Membrane adhesive

lien_he

  • This adhesive is suitable with both curing methods by UV light and by visible light;
  • Multipurpose, especially for peel-resistant plastic bondings e.g., bonding of membrane foils into loudspeaker baskets or bonding of coils to membranes.
HOT

Sealant adhesive CIPG/FIPG DELO PB SL4155

lien_he

 PHOTOBOND SL4155 is a one-component adhesive line derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for sealing flange rubber gaskets. After curing, the glue has a dry surface and good elasticity.

HOT

DELO PHOTOBOND 4468 - Metal and Glass Adhesive

lien_he

  • It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
  • Resistant to humidity;
  • Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
  • Compliant RoHS standard 2015/863/EU;
  • Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.
HOT

DELO PHOTOBOND GB368 - Glass Adhesive

lien_he

  • The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
  • UV curing ability in the range from 320 nm to 420 nm;
  • Operating temperature: -40 0 C ~ 120 0 C, depending on the certain application.
HOT

Sealant adhesive CIPG DELO PHOTOBOND SL4165

lien_he

DELO PHOTOBOND SL4165 is a kind of one-component adhesive derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for creating CIPG (Cure In Place Gasket) elastic gaskets for electronic components, battery packs, ..., and sealing flanges and gaps. After curing, the glue has a dry surface and good elasticity.