DELO PHOTOBOND AD441 – Tweeter Membrane adhesive

DELO PHOTOBOND AD441 – Tweeter Membrane adhesive

lien_he

  • This adhesive is suitable with both curing methods by UV light and by visible light;
  • Multipurpose, especially for peel-resistant plastic bondings e.g., bonding of membrane foils into loudspeaker baskets or bonding of coils to membranes.

Introduce:

  • It is a UV and visible light-curable acrylate adhesive, medium viscosity;
  • Ingredients: modified acrylate, 1-component glue, solvent-free.

AD441.2

Application:

  • Application in many fields, especially suitable for bonding resistant plastic to peel off the layers in the enclosure diaphragm or link the coil core to the diaphragm;
  • Easy to operate due to the fluorescent yellow color;
  • Operating temperature: -40 0 C ~ 120 0 C, depending on the application there may be specific limits;
  • Meets RoHS 2015/863/EU standard.

Typical applications of PHOTOBOND AD441 glue:

 

PB AD441. membrane

Bonding Tweeter Membrane to Bobbin 

Curing:

  • Use UV or visible light with a wavelength from 320~450nm;
  • All DELOLUX lamps are designed to be compatible with the AD441;
  • Increasing the light intensity will shorten the irradiation time and conversely, decreasing the light intensity will prolong the glue curing process.

 

Specifications:

Colour:

fluorescent yellow

Density:

1.0 g/cm3

Viscosity (at 23 °C, Brookfield measurement, spindle head no. 7, speed 5 rpm):

30000 mPas

Minimum UV curing time: (DELOLUX, UV intensity 60 mW/cm 2)

8s

Compression shear strength on the joint:

glass/glass

10 MPa

glass/Al

9 MPa

PC/PC

20 MPa

glass/PBT

4 MPa

PMMA / PMMA

9 MPa

Tensile strength:

16 MPa

Elongation at tear:

300 %

Young's modulus:

100 MPa

Glass transition temperature:

700C

Decomposition temperature:

2250C

Water Absorption:

0.9%

Shelf life:

6 months, stored at 0 ~ 25 0 C with the unopened container.

 

For more detailed information, please contact us.

HUST Vietnam is proud to be the exclusive distributor of adhesive products, dispensing and curing systems, and technology transfer from DELO in Vietnam!

Bình luận

HOT

DELO PHOTOBOND AD494 - Glue for glass, PC plastic, transparent

lien_he

  • This is a type of acrylate that can be cured by UV and light, high viscosity, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, etc.
  • Ingredients: modified acrylate, 1-component adhesive, solvent-free, viscous-modified (thixotropic)
HOT

DELO PHOTOBOND UB4086 – Mini Loudspeaker Adhesive

lien_he

Introduce:

  • This adhesive suitable for both curing methods by UV light and by visible light in a short time;
  • It’s just one component base on modified urethane acrylate, high viscosity.
  • Multipurpose, especially for the bonding of membranes and coils in mini loudspeakers;
  • Good adhesion to plastics like PEEK, PEN, PEI, and PAR;
HOT

DELO PHOTOBOND AD491 Adhesive

lien_he

  • This is an adhesive suitable for both curing methods by UV light and by the visible light;
  • It’s just one component base on modified urethane acrylate, high viscosity;
  • Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.
HOT

Sealant adhesive CIPG/FIPG DELO PB SL4155

lien_he

 PHOTOBOND SL4155 is a one-component adhesive line derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for sealing flange rubber gaskets. After curing, the glue has a dry surface and good elasticity.

HOT

DELO PHOTOBOND 4468 - Metal and Glass Adhesive

lien_he

  • It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
  • Resistant to humidity;
  • Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
  • Compliant RoHS standard 2015/863/EU;
  • Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.
HOT

DELO PHOTOBOND GB368 - Glass Adhesive

lien_he

  • The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
  • UV curing ability in the range from 320 nm to 420 nm;
  • Operating temperature: -40 0 C ~ 120 0 C, depending on the certain application.
HOT

Sealant adhesive CIPG DELO PHOTOBOND SL4165

lien_he

DELO PHOTOBOND SL4165 is a kind of one-component adhesive derived from modified acrylate. The glue has catalytic properties and high viscosity, specialized for creating CIPG (Cure In Place Gasket) elastic gaskets for electronic components, battery packs, ..., and sealing flanges and gaps. After curing, the glue has a dry surface and good elasticity.