DELO Industrial Adhesives

• XD160 is an X-ray machine with a capacity of up to 400W, used to inspect defects inside cast aluminum products, thick samples, large sizes.
• Simple operation, time to install, test and give results about 5-10 minutes.
• The X-ray tube and the Detector are on the C-arm, horizontally, allowing high-height samples to be examined.
• 360 degree rotating sample stage

Damp heat chamber AUTOMATIC for high humidity tests in Constant (CH) and Alternate (AHT, AT) atmosphere to simulates rain and dew by condensing liquid water directly onto the test specimen (high humidity 95% to 100% saturated atmosphere).

Model: D200

Maker: COFOMEGRA - Italia

• The Qmount is a modern device for the light-curing-based mounting of materialographic samples.

The DS 1100 Belt Grinder is ruggedly designed, suitable for grinding Steel samples, providing optimum surface preparation prior to component analysis in the OES - Optical Emission Spectrometer.

• Grinding machine DS 300/2 2-disc, floor-standing, large capacity, sturdy design, suitable for grinding samples of Steel, Cast iron or even Copper, Aluminum Zinc alloys, ... optimal surface preparation in advance when analyzing the composition at the OES - Optical Emission Spectrometer

• LP 3000 Polishing machine for preparation of Ferrous and Non Ferrous spectrometric samples. It is supplied with proper lapping tool accordingly to the alloy of the sample to be prepared (Aluminium, Copper, Cast Iron)

• The EQM-402 Ball Mixer Mill is our great ally when preparing samples for analysis, as it can grind, mix and homogenize quickly small amounts of sample. Especially designed for the final preparation of hard, semihard, and brittle samples – up to 50 ml -. Able to prepare two samples simultaneously and reduce them from an initial grain size of 0,8 to 1,5 mm to a size of less than 10μ in a very short time – 1 to 4 minutes.

• The EQR-200 Vibratory Disc Mill is a grinding unit especially designed to obtain analytical granulometries of a wide variety of samples, such as glass, earth, slag, metallic oxides, ferroalloys, and ceramic materials, amongst many other

• The Equilab Pellet Presses have been especially designed to obtain pellets of great quality finish, with a high level of cohesion and stability, and with very flat, regular and crack free surfaces. The EPQ-1 Manual Pellet Press can exert a pressure of up to 20 tons. It is very easy and safe to use, and takes very little space.

• The EQP-100 Semiautomatic Pellet Press can exert up to 40 tons to prepare Ø 40 mm pellets. With a simple and robust design, this unit is very effective and easy to manage, and offers up to five different working programs of single and double cycle.

• The EQP-200 Semiautomatic Pellet Press can prepare pellets of several diameters and shapes thanks to different pressing tools. Robust and durable, it applies a pressure of up to 40 tons , with five programs of single or double cycle.

• The F1 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures

• The F2 Induction Fusion Unit has been especially designed to facilitate and speed up the preparation of glass disks for analysis by X-Ray, AA solutions and for ICP analysis. The purpose is to produce, accurately and quickly, beads and dissolutions with classic fluxes (Borates), as well as to undertake high quality oxidations of elements non oxidized, using peroxides. Its performance is highly efficient both at high and at low temperatures.

• The EQJ-100 Jaw Crusher is a crushing unit specially designed for the primary reduction of semi-hard, hard, brittle and tough materials. Able to quickly and efficiently crush glass, earth, slag, metallic oxides, cements and construction materials, ferroalloys, ceramic materials, minerals and stones

• DELO-PUR9694 is multi-purpose, bonding glass/metal, PBT, PET, and many other materials.
• Fix components with passivation surfaces (Ferrite, PBT, Al, PET foil), such as coils, capacitors, and plugs, etc. on the FR4 printed circuit board to prevent vibration;
• The glue has a good resilience to the touch, high strength for both static and dynamic loads, good response to large gaps due to its ability to resist vibration during operation.

• It is a UV curing, high viscosity acrylate adhesive, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, aluminum, stainless steel, etc. …;
• Resistant to humidity;
• Ingredients: modified acrylate, one-component glue, solvent-free, thixotropic;
• Compliant RoHS standard 2015/863/EU;
• Achieve certified biosafety standards USP 23, 1995, Class VI Plastics -70 ° C.

• The application is especially suitable for bonding layers of glass, furniture, decorative glass, building glass walls, etc. After curing, the adhesive has a dry surface.
• UV curing ability in the range from 320 nm to 420 nm;
• Operating temperature: -40 ⁰ C ~ 120 ⁰ C, depending on the certain application.

• Two-component, room-temperature-curing, high-viscosity polyurethane adhesive allowing use in closed die-casting applications;
• Meets RoHS 2015/863/EU and UL 94 HB standards;
• Compliant DIN EN ISO 10993-5 biocompatibility test: cytotoxicity test.

• DELO-DUOPOX TC8686 (TC=Thermal Conductive) is a 2-component adhesive, base on modified epoxy resin, that cures at room temperature for 168h but will accelerate to cure within 1h when heated to +80 ^oC. It is developed for the application of Lithium battery pack bonding application to heat sinks for batteries in electric vehicles.
• - Compliant RoHS certified according to directive 2015/863/EU;
• - Passed ANSI/UL 94 V-0 Flammability Test

- Specialized glue in gluing electronic components, smartphone camera modules, automotive cameras, ...

- Adhesive to a variety of materials such as glass, aluminum, PC plastic, FR4, GF30, ...

- Ingredients: derived from modified polycarbamin acid, a 1-component glue, no solvents;

- Use in temperature range: -40 ⁰ C ~ 130 ⁰ C, depending on the application; 

- Compliant RoHS standard 2015/863/EU;

- Does not contain halogen elements according to IEC 61249-2-21;

- Compliant with the VOC content limit according to GB33372-2020 regulations;