DELO Industrial Adhesives

• Two-component, room-temperature-curing, high-viscosity polyurethane adhesive allowing use in closed die-casting applications;
• Meets RoHS 2015/863/EU and UL 94 HB standards;
• Compliant DIN EN ISO 10993-5 biocompatibility test: cytotoxicity test.

• DELO-DUOPOX TC8686 (TC=Thermal Conductive) is a 2-component adhesive, base on modified epoxy resin, that cures at room temperature for 168h but will accelerate to cure within 1h when heated to +80 ^oC. It is developed for the application of Lithium battery pack bonding application to heat sinks for batteries in electric vehicles.
• - Compliant RoHS certified according to directive 2015/863/EU;
• - Passed ANSI/UL 94 V-0 Flammability Test

- Specialized glue in gluing electronic components, smartphone camera modules, automotive cameras, ...

- Adhesive to a variety of materials such as glass, aluminum, PC plastic, FR4, GF30, ...

- Ingredients: derived from modified polycarbamin acid, a 1-component glue, no solvents;

- Use in temperature range: -40 ⁰ C ~ 130 ⁰ C, depending on the application; 

- Compliant RoHS standard 2015/863/EU;

- Does not contain halogen elements according to IEC 61249-2-21;

- Compliant with the VOC content limit according to GB33372-2020 regulations;

The DELOMAT 100 pneumatic dispensing system includes 3 main parts: the DELOMAT 100 Controller, the DELO-XPRESS 951 (NK) Pressure Tank, and the Pinch Valve.

The device has a simple structure, is easy to install, and can be applied directly by hand or attached to the robot arms for automatic control.

Compatible with DELO glue bottles up to 1 liter volume. In addition, it can be used to spray surface cleaning solutions before applying glue.

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

DELO-XPRESS 905 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 200 ml side-by-side glue cartridges and 1:1 and mixing ratio 1:2. This is a larger version of DELO-XPRESS 903, for larger volume glue bottles and for applications where large areas of adhesive are required.

The gun uses compressed air to help apply the glue accurately, without the glue falling due to residual stress like other manual guns. The force acting on the trigger lever is very small, and the weight of the gun is quite light, the design does not cause hand fatigue while applying the glue.

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.

• Suitable for removing epoxy, acrylate adhesives when they have not been fully cured. Especially specialized for PHOTOBOND glue line, DUALBOND acrylate.
• The composition does not contain volatile substances harmful to the environment CFC/FC, safe for users.
• Bottled in 1000ml cans or 500ml aerogel spray bottles for convenient use.

• It is a transparent, solvent-free, low-viscosity, flowable, modified epoxy adhesive with fully curing by light.
• Halogen-free according to IEC 61249-2-21;
• Compliant RoHS 2015/863/EU standard.
• Specialized in bonding optical materials, imprint materials.

DELO DUALBOND IC343 is an isotropic electrically conductive adhesive by adding conductive silver particles (Ag) to the glue, so the glue has very high conductivity, the volume resistance is only about 0.1 mOhm.cm. IC343 glue has many advantages such as: 

• Glue is derived from modified polycarbamine acid, 1 component, no solvent.
• The glue can be quickly fixed by light in just a few seconds, then cured at a low temperature.
• Glue is thixotropic, anti-creep when applying glue.
• Compliant with RoHS 2015/863/EU standard;
• Halogen-free according to IEC 61249-2-21;
• Compliant with VOC volatile organic matter content limits according to GB33372-2020.

DELO DUALBOND IC4753 is an isotropic electrically conductive adhesive by adding conductive silver particles (Ag) to the glue, so the glue has very high conductivity, the volume resistance is only about 0.1 mOhm.cm.

• Solvent-free, 1-component, modified acrylate adhesive;
• Glue has catalytic properties, prevents sagging when applying glue;
• The glue can be quickly fixed by UV light in just a few seconds, and then dried at low temperature;
• Compliant with RoHS 2015/863/EU standard;
• Halogen-free according to IEC 61249-2-21.

• For entry into the eddy current structure test, we offer a digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT) and Simultaneous Harmonic Analysis.
• Eddy current testing for material properties such as hardness, case depth, case depth pattern, structure, tensile strength, heat treatment or alloy.

• A state-of-the art digital eddy current test instrument for one channel nondestructive testing of metal components, mass produced parts and semi-finished products according to the Preventive Multi-Frequency Technology (PMFT) and Simultaneous Harmonic Analysis.
• Eddy current testing for material properties such as hardness, case depth, structure, tensile strength, heat treatment or alloy.

• Digital eddy current test instrument for nondestructive testing of components, mass produced parts and semi- finished products for material properties such as hardness, case depth, case depth pattern, structure, tensile strength, heat treatment or alloy using Preventive Multi-Frequency Technology with Simultaneous Harmonic Analysis.
• High power modular instrument concept with max. 16 independent crack detection channels, max. 32 structure test channels and their combinations.

• The entry into the eddy current crack detection
• Digital eddy current tester for one channel nondestructive (NDT) testing of metal components, including mass produced parts and semi-finished products for cracks, pores and grinder burn according to the Preventive Multi-Filter Technology (PMFT).

• The Standard of Eddy Current Crack Detection for Production and Laboratory
• Digital eddy current test instrument for one channel nondestructive(NDT) testing of metal components, including mass produced parts and semi-finished products for cracks, pores and grinder burn according to the Preventive Multi-Filter Technology (PMFT).
• The new ibg-family of digital eddy current crack detection instruments offers for the first time a simultaneous 100% zero defect inline detection of grinder burn and cracks in your production line parts. Due to automatically generated 360° tolerance zones, testing over 30 simultaneous band passes and ibg’s own good-part-referencing you will also find defects which conventional instruments with defect-oriented calibration will miss.

• The New Standard of Eddy Current Crack Detection for Production and Laboratory.
• Digital eddy current test instrument for nondestructive testing of components, mass produced parts and semi-finished products for cracks, pores and grinder burn using Preventive Multi-Filter Technology.

• The proper solution for each test task: Our wide range of standard accessories includes encircling coils, rectangular coils, inner diameter coils, flat coils and probes. Customised products for special test tasks are provided by our in-house design and manufacturing departments. ibg coils stand out due to highest test sensitivity and temperature stability. Furthermore, they offer a maximum of investment security as they may be operated with all ibg structure test instruments. So you can replace an old ibg test instrument by a new generation instrument, and the coils can still be used.