DELO DUALBOND MF4992 | Adhesive for mini loudspeaker | HUST

DELO DUALBOND MF4992

lien_he

- This adhesive suitable for two curing methods includes visible light and humidity within seconds. It has high viscosity with one component, solvent-free base on modified acrylate, and has thixotropic.

- Especially suitable for peeling resistant bonding of membranes and coil in mini loudspeaker;

- Multipurpose for plastic/plastic, glass/plastic, metal/plastic, glass/glass, and glass/metal bondings;

 

Introduce:

This adhesive suitable for two curing methods includes visible light and humidity within seconds. It has high viscosity with one component, solvent-free base on modified acrylate, and has thixotropic.

 Application range:

  • Especially suitable for peeling resistant bonding of membranes and coil in mini loudspeaker;
  • Multipurpose for plastic/plastic, glass/plastic, metal/plastic, glass/glass, and glass/metal bondings;
  • Easy to control due to fluorescent color with emission wavelengths from 440 to 610 nm;
  • Wide temperature range for use of -40 oC ~ +150 oC, depending on the application, other limits may be more reasonable;
  • Compliant with RoHS directive 2015/863/EU.

Processing:

  • Supplied ready for use and better if used with DELO dispensing units;
  • In case of cold storage, it must be ensured that the container is conditioned to room temperature before use;
  • At room temperature (18 ~ 25 oC), the time to temperature container reaches condition approx. 0.5h for 50 ml, 4h for 1000 ml of container volume, additional heat is not allowed.
  • The surfaces to be bonded must be clean and dry, any contaminations as dust, grease should be cleaned;
  • Use DELOTHEN cleaners to clean bonding surfaces and DELOTHEN EP cleaner for cleaning of glass is recommended.

Curing:

  • Curing with UV light or visible light in a wavelength range of 320 – 450 nm and by humidity in shadowed areas;
  • Humidity curing starts at the surface of the acrylate; a skin is formed after a few hours; deep curing of the acrylate proceeds with approx. 2 mm/ 24 h;
  • The adhesive can be cured within seconds with light, but if only cure by humidity, maybe need 72h to reach full performance.

Technical data:

  • Color: red fluorescent;
  • Density: 1.06 g/cm3;
  • Viscosity (at 23 oC, rheometer, 2 1/s): 100000 mPas;
  • Minimal curing time: 13 s with LED intensity, 200 mW/cm2;
  • Compression shear strength glass/glass: 9 (MPa);
  • Compression shear strength glass/stain steel: 6 (MPa);
  • Compression shear strength glass/Al: 8 (MPa);
  • Compression shear strength glass/PA: 8 (MPa);
  • Compression shear strength PC/PC: 8 (MPa);
  • Compression shear strength glass/PBT: 4 (MPa);
  • Compression shear strength glass/FR4: 9 (MPa);
  • Compression shear strength glass/PC-ABS: 7 (MPa);
  • Compression shear strength glass/PPA: 6 (MPa);
  • Tensile strength: 8 (MPa);
  • Elongation at tear: 350 (%)
  • Young’s modulus: <100 (MPa);
  • Shore hardness A: 58;
  • Glass transition temperature: 66 (oC)
  • Shrinkage: 4.3 vol. %;
  • Water absorption: 2.8 wt. %;
  • Peeling resistance PEEK/PEEK (0.05 mm): 4 (N/cm);
  • Peeling resistance PAR/PAR (0.1 mm): 10 (N/cm);
  • Peeling resistance PET/PET (0.05mm): 7 (N/cm);
  • Peeling resistance PEN/PEN (0.05 mm): 7 (N/cm);
  • Processing time (at max. 25 oC): 2 weeks;
  • Storage life at 0 to +10 oC (in unopened original container): 6 months.

Please contact us for more information!

 

Bình luận

HOT

DELO DUALBOND RE3440 Adhesive for camera

1 VND

  • Applied in many fields, especially the production of electronic components, microchips, electrical engineering, telephones... used for quick fixation of components after irradiation, bringing high durability;
  • Especially for quick fixation of components that need to be cured at low temperature;
  • Cured products are generally used in the temperature range of -40°C to +130°C; depending on the application, other limits may be more reasonable;
  • Complies with RoHS directive 2015/863/EU;
  • Halogen-free according to the criteria of IEC 61249-2-21;
  • Compliant VOC content limit according to GB33372-202 criteria.
Buy
HOT

DELO DUALBOND AD4950 - Electronic Adhesive

lien_he

  • This adhesive is suitable for two curing methods both by UV light and by humidity;
  • It has medium viscosity with one component, solvent-free base on modified acrylate.

DELO DUALBOND AD465 Adhesive

lien_he

 This is an adhesive one component, solvent-free adhesive base on modified urethane acrylate.

 It allows users to choose between curing methods with light, heat, or moisture.

 Apply for many sectors as the production of electronic components, ICs, electrical engineering, telephones, automobiles, photovoltaics, precision engineering, used to mount materials and cover,…

HOT

DELO DUALBOND OB786 Adhesive for microcircuit

lien_he

  • As a glue compatible with both heat and UV curing, it has low air release, low shrinkage, and low CTE;
  • Ingredients: modified epoxy resin, 1-component glue, solvent-free;
  • High viscosity, catalytic properties (Thixotropy);
  • Used for bonding between materials such as metal, glass, plastic as well as casting, fixing, or mounting around electronic components;
  • Operating temperature: -40 0 C ~ 150 0 C, depending on the application;
  • RoHS compliant 2015/863/EU, Halogen-free according to IEC 61249-2-21;
  • Meets the VOC limit for adhesives according to the GB33372-2020 regulation.

DELO DUALBOND AD345 Adhesive

lien_he

  • This adhesive is suitable for both curing methods by UV light and by the heat addition;
  • It’s just one component base on modified polycarbamine acid with dual curing features.
HOT

DELO DUALBOND GE4949 - Adhesive for camera

lien_he

- DELO DUALBOND GE4949 is a modified acrylate adhesive that cures by UV and air humidity in just a few seconds;

- Glue has good tensile-equalizing thanks to its high elongation at tear;

- Compliant RoHS standards according to 2015/863/EU;

- Compliant with VOC content limit according to GB33372-202 regulation.

HOT

DELO DUALBOND LT2266 sensor adhesive

lien_he

  • It is an epoxy glue that cures at low temperatures, used for bonding temperature-sensitive sensors, camera modules, etc.
  • Adhesive meets halogen-free standards according to IEC 61248-2-21 regulations;
  • Meets RoHS 2015/863/EU standards;
  • Glue can be dispersed using robot systems with needle tips.
  • Operating temperature: -40 0C ~ 150 0C, depending on application;
  • Meets volatile organic matter (VOC) content limit standards according to GB33372-2020;
  • Meets DIN EN ISO 10993-5: cytotoxicity test.
HOT

DELO DUALBOND LT3411 - Adhesive for camera module

lien_he

  • This is the glue that is compatible with both UV light and low temperature curing methods (+80oC);
  • The ingredient is just one component based on polycarbaminacid being modified, non-solvent.
  • Non-halogen by the criteria of IEC 61248-2-21;
  • Compliant with RoHS 2015/863/EU;
  • The adhesive is supplied ready to use, to achieve the best performance, it can be dispensed by injection systems or use metal injection needles.