DELO Industrial Adhesives

Forced Convection Dry Oven

1. Excellent temperature control accuracy with Digital P.I.D. Temperature Controller

2. Even temperature distribution available by forcing the circulation of air inside the Chamber with Sirocco Fan.

3. No transfer of internal heat to outside offered with complete Double Heat Insulation Treatment.  

• The OPAL 480 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing

Europe 600 is a benchtop general purpose diffractometer for XRD

It is available in two different version, with Theta/2Theta goniometer and with the new Theta/Theta goniometer manufactured by GNR

AreX L is a unique and outstanding instrument able to measure in an automated and easy to use way Retained Austenite in compliance with ASTM E 975 -03.

StressX is a X-Ray Diffractometer dedicated to the Residual Stress Analysis

EN UNI 15305 and ASTM 915 compliant

Explorer is a multi purpose - Theta/Theta - high resolution diffractometer

EXPLORER allows to perform measurement in different configurations: traditional X-Ray Powder Diffraction (XPD), Reflectometry (XRR), Grazing Incidence X-Ray Diffraction (GIXRD), High Resolution X-Ray Diffraction (HRXRD), Total X-Ray Fluorescence (TXRF), Residual Stress and Texture X-Ray Diffraction.

• OPAL 410 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. Mould assemblies can be exchanged quickly and without tools

• The hot mounting press Qpress 50 is a modular machine used in metallography for the fast, simultaneous and independent mounting of different materialographic specimens

• This adhesive is suitable for both curing methods by UV light and by the heat addition;
• It’s just one component base on modified polycarbamine acid with dual curing features.

• This is a type of acrylate that can be cured by UV and light, high viscosity, suitable for bonding a variety of materials such as glass, PC plastic, PMMA, PA6, PBT, etc.
• Ingredients: modified acrylate, 1-component adhesive, solvent-free, viscous-modified (thixotropic)

Introduce:

• This adhesive suitable for both curing methods by UV light and by visible light in a short time;
• It’s just one component base on modified urethane acrylate, high viscosity.
• Multipurpose, especially for the bonding of membranes and coils in mini loudspeakers;
• Good adhesion to plastics like PEEK, PEN, PEI, and PAR;

• This is an adhesive suitable for both curing methods by UV light and by the visible light;
• It’s just one component base on modified urethane acrylate, high viscosity;
• Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.

• DELO-GUM is a one-component, solvent-free, heat-resistant base on modified silicone adhesive (RTV-1 Heat Resistant Silicone) used in a wide range of adhesive and sealing applications;
• The heat resistance of DELO-GUM glue is usually from -50 to +180 ^oC, especially DELO-GUM 3699 glue can withstand heat up to 300 ^oC;
• DELO-GUM is widely used in bonding metal, plastic, rubber, glass, and many other materials;
• All products meet RoHS standards according to directive 2015/863/EU.

• This adhesive is suitable with curing methods by UV light and can be activated by visible light;
• Multipurpose, especially for tensile-equalizing bonding and sealing, in particular in the case of high-temperature fluctuations at the component.

Dispensing without bubble, not jam with DELO FLEXCAP – smart valve!

DELO FLEXCAP is a close valve, operate by the elastomeric membrane. It replaces for normal piston, thus, this is a perfect method to store, move, and dispense glue without bubble – help dispense exactly adhesive amount.

• This is the new version Microdispensing Valve adhesive!
• Advantage of DELO-DOT PN3 than other valves: dispensing adhesive without nozzle, not contact. Therefore, this equipment allows dispensing super small adhesive amount, prevent the impact of the valve with the material surface. Besides, no necessary to move the valve follow the z-axis during operation.

• The DELOLUX 20 and DELOLUX 202 UV glue curing equipment ensures fast uniform curing of UV glue inline production.
• The intensity of up to 2000 mW/cm ² and the large irradiation area (≥100 x 100 mm ² ) help the glue to dry quickly and evenly;
• The DELOLUX 20/202 can be customized for small-scale production or integrated into automated assembly lines.
• It is possible to combine 1 ~ 4 lamp heads on 1 control module to increase the irradiation area up to ~ 400 x 400 mm ².
• In addition, the DELOLUX 20 / 202 has a shelf life of > 20,000 hours, allowing continuous operation while ensuring a long life.

The DELOLUX 80 UV Lamp head with the intensity of up to 4000 mW/cm ² for 365 nm model and 5500 mW/cm ² for 400 nm model, the distance to the glued surface can be adjusted up to ~5 cm, making it easy to arrange the lights and bonded surfaces, and compatible with more element sizes.