Portable XRF for sulfur analysis in oil

Portable XRF for sulfur analysis in oil

lien_he

  • PeDX OIL is a portable XRF analyzer that provides sulfur analysis methods for the energy industry. It can analysis of lubricating oil, diesel fuel, kerosene, jet fuel, other distillation oil, volatile oil, residual oil, hydraulic oil, crude oil, unleaded gasoline, ethanol gasoline, biodiesel,...

PeDX OIL is a portable XRF analyzer that provides sulfur analysis methods for the energy industry. It can analysis of lubricating oil, diesel fuel, kerosene, jet fuel, other distillation oil, volatile oil, residual oil, hydraulic oil, crude oil, unleaded gasoline, ethanol gasoline, biodiesel, and other similar elements content in petroleum products such as oil and wear elements, pollutants, and the existence of the sulfur content within a few minutes . Analysis of sulfur content in safe, high-quality liquid, solid or gas samples can be carried out elsewhere where oil products are used.

LANScientific PeDX OlL portable XRF analyzer meets the testing standards:

- GB/T17040-2008 Determination of sulfur in Chinese petroleum and petroleum products.
- GB/T 17060-1998 Determination of Sulfur in Chinese Crude Oil.
- GB/T 380-1977 Determination of sulfur content in Chinese petroleum products.
- GB/T 17411-2015 Marine fuel oil.
- SH/T 0253-1992 Determination of total sulfur in light petroleum products.
- SH/T 0631-1996 Determination of barium, calcium, phosphorus, sulfur and zinc in lubricating oils and additives.
- ISO 8754-2003 Determination of sulfur content of International petroleum products.
- ISO 20847-2004 Determination of sulfur content of International petroleum products, motor fuel.
- ISO 13032-2010 Determination of sulfur content of international gasoline fuels.
- ISO 20847-2004 Determination of sulfur content of International petroleum products, motor fuel.
- ASTM D4294 Test Methods for Sulfur in U.S. Petroleum and Petroleum Products.
- ASTM D7220 Standard Test Method for Sulfur in U.S. Petroleum and Petrochemical Products.
- ASTM D7039-2007 Test Method for Sulfur in US Gasolie and Diesel.
- ASTM D5453-2009 Test Method for Total Sulfur in Engine Fuels and Engine Oil in the United States.
- ASTM D6481-1999 Standard Test Method for Phosphorus, Sulfur, Calcium and Zinc in US.

Specifications:

 

Weight4.1KG
Size200mm×200mm×268mm(L×W×H)
Size of Sample Room170mm×130mm×60mm(L×W×H)
Excitation sourceUp to 50kV, 200uA X-ray tube, upper excitation power 4W, Ag/Rh target
Detector

BOOST Si-pin/SDD(Optional)

Operation System

Based on the I. MX 6 Quad, quad-core Cortex-A9 processor

Dedicated analytics operating system, 32GB of system memory

Data Processing

Built-in 32GB storage

USB, can connect the device to the Internet, remote setting and maintenance of the instrument

Target

W/Ag/Rh(Optional)

Resolution

<136eV

Data Transfer

USB, Bluetooth

Operating Ambient Temperature

-20℃~50℃

Operating Ambient Humidity

10%~90% relative humidity, non-condensing

Display

5.7-inch absorbable color touch screen display

Test Time

User customize

Optional

Built-in 5 million pixel high-definition camera

Language

Chinese, English, etc.

Air mode

Air mode, helium mode, vacuum mode (optional)

 

Bình luận

HOT

Coating thickness analyzer with large sample chamber

lien_he

  • INSIGHT aims to provide accurate and efficient analysis methods for coating analysis applications. INSIGHT is easy to operate and flexible to configure, which can easily challenge ultra-thin coatings, provide fast, accurate and repeatable results.

Affordable coating thickness analyzer

1 VND

  • The content of quality inspection of different coating products varies depending on the part and coating, but the appearance, thickness, corrosion resistance and bonding force with the base metal of the coating must be checked for all coatings, and the thickness of the coating is the quality of the coating
  • Aiming at the detection and screening problems in the process control of surface treatment, product quality inspection and other links in the ironware application, LANScientific provides you with an efficient and intelligent XRF analysis instrument –  INSIGHT 200.
Buy
HOT

Coating thickness analyzer for small parts

1 VND

  • The INSIGHT coating analyzer uses a micro-focusing X-Ray tube to collect most of the rays from the X-Ray source and focus them into a micro-beam spot, which is irradiated at the sample position, so as to obtain good spatial resolution and strong fluorescence signal
Buy

ScopeX PILOT Coating Thickness Analyzer

lien_he

  • ScopeX PILOT adopts down-top analysis design, equipped with advanced Multi-FP algorithm software, microlight aggregation technology and high-sensitive zoom distance measurement device. It can do fast, accurate and non-destructive testing on uneven, irregular and tiny samples.
  • It can easily deal with difficult problems in surface treatment process control product quality inspection and screening in coating field. ScopeX PILOT is widely used in jewelry, electroplating industry, automotive industry, hardware and bathroom, aerospace, electronic semiconductor and other fields.

Handheld XRF for Alloy analysis

lien_he

  • The TrueX handheld alloy analyzer integrates the latest scientific innovations of LANScientific and is a powerful tool for metal material identification in the production process. It has the advantages of fast, high precision, portability, and other advantages. It can carry out on-site detection and rapid classification of large amounts of metal waste, providing users with rapid, efficient and accurate data information.

Handheld XRF for Mineral analysis

lien_he

  • The LANScientific TrueX mineral analyzer provides rapid and accurate elemental analysis results with little or no sample preparation at all stages of a mining operation, from grassroots exploration and development, to ore grade control, and even environmental investigations. Sample density increases compared to traditional laboratory methods. Save time, worry and effort.

Handheld XRF for RoHS application

lien_he

  • The TrueX RoHS analyzer can be used to analyze the chemical composition of consumer products such as toys, clothing, footwear and electronic equipment in the field. It can quickly detect toxic elements such as lead Pb,Cd, Hg, Cr, Br and determine whether these consumer products comply with RoHS regulations. With the advantages of high sensitivity and high repeatability, it is the ideal choice for incoming material inspection, safety audit of finished products and storage products.

Handheld XRF for precious metal analyis

lien_he

  • TrueX G7 is a cost-effective precious metal analyzer designed by LANScientific for non-destructive precious metal analysis equipped with high-performance X-Ray tube and large-area detector, which can quickly and determine the purity and composition of precious metals such as gold, silver and platinum, featuring advantages of NDT, portability, quickness, high stability, accuracy and sensitivity.