Application of DELO adhesive in production

Application of DELO adhesive in production | HUST Vietnam

ADHESIVES FOR AUTOMATED DRIVE ASSISTANCE SYSTEM (ADAS)

Automated driving (Level 3) is deemed technically viable thanks to high-performance driver assistance systems (ADAS) is also thanks to innovations in the field of adhesive bonding technology. Adhesives make a small, but nevertheless important contribution to the future of driving. 

See more

LiDAR sensor on advanced driver assistance systems (ADAS) and the interest about DELO adhesives

Advanced driver assistance systems (ADAS), especially LiDAR cameras and sensors, is considered an effective assistant for drivers to help avoid collisions that cause traffic accidents on the road.

The requirements for sensor components are constantly increasing, as the highest

See more

GLUE FOR GLASS FURNITURE – CREATING NEW DESIGN TREND

Glassware brings a sense of luxury and sophistication to living rooms, cafes, or public spaces.

Glue is used a lot to bond glass parts together. Adhesives DELO PHOTOBOND PHOTOBOND 4494 and GB368 are two common glue codes used in these applications.

See more

PRE-ACTIVATION METHOD: NEW INNOVATIONS FOR OPAQUE SURFACE BONDING

The glue layer after being dispensed on the first surface will be irradiated with UV light for a few seconds to activate the curing reaction, while the glue is still in a wet state, the open time is about 20 seconds after activated, enough for us to join the second surface on.

See more

How to choose controller model for DELOLUX 20/202 UV lamps

DELOLUX 20/202 lamp heads are used to irradiate UV glue when applied to large surface areas such as car screens, phones, electric motors, bearings, and magnets to housing bonding, ...(with the usual area from 100 ~ 400 cm 2, can be increased or decreased depending on customer requirements).

See more

Guide to choosing DELOLUX pilot Sxi or SxT controller for DELOLUX 50 spot UV irradiators

Applications that require UV adhesive and UV curing are very common in the industry. Depending on different purposes, choosing the appropriate type of glue and UV lamp is necessary. For small parts such as in electronic components, the bonding area is only a few millimeters, the choice of a spot-type<

See more