Walk in Salt Spray Test Chamber
Model: TMJ-9703R
Maker: T-Machine / Taiwan
- Test Object: battery pack andsystem.
- Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.
- The salt solution was made up with sodium chloride (chemically pure and analytically pure) and distilled or deionized water,Its concentration is (5 + 1)% (mass fraction).
- (35 ± 2) ℃, the measured pH value is between 6.5-7.2.
- Placed the test objects in the salt spray chamber for cycling test. Each cycling duration for 24h. Spray salt solution to the test object for 8 hours under the temperature of (35± 2) ℃ , remain for 16 hours. Between the forth and the fifth hour in one cycles should be according to test requirement in GB/T 28046.1-2011, test mode with 3.2.
- Total 6 cycles testing.
- Salt spray test is not necessary for the test objects being installed in passenger, luggage or cargo compartments.
Technical Parameters
Product Name | Walk in Salt Spray Test Chamber | |
Model No. | TMJ-9703R | |
Volume | 5m3 ~ 15m3 or Customing volume |
|
Max Load | Customing max load | |
Temp. Range | 0℃~+85℃ | |
Temp. Fluctuation | ±0.5℃ | |
Temp. Deviation | 2℃ | |
Spray Capacity | 1~2mL/80cm2/hr (Collect at least 16 hours, take the average ) | |
Spray Pressure | 1.00±0.01kgf/cm² | |
Resolution | Temp: 0.01℃, Humidity:0.01%R.H. | |
Humidity Range | 30%–98%R.H | |
Humidity Fluctuation | ±3%R.H. | |
Potion PH | Neutral 6.0~7.0 Acidity 3.0~3.1 | |
Spray Solution PH | Neutral 6.5~7.2 Acidity 3.1~3.3 | |
Test Time Range | 1S ~ 9999H (Settable) | |
Control Mode | Touch screen programmable control PLC, networking; mobile phone APP alarm; with USB interface, with RJ485 interface can be connected to computer control, exclusive network control software. Remote monitoring and data acquisition. | |
Internal material | Acid and alkali resistant SUS316 material | |
External material | Cold and heat resistant steel plate with spray coating | |
Cooling Mode | Air cooling / water cooling |