DELO – ML: Thread-sealing, vacuum tightness adhesive

DELO – ML Thread-sealing, vacuum tightness, heat resistant adhesive

10:57 - 26/12/2020

In the field of mechanics, hydraulics, pneumatics, there are many components that need to be connected by threaded bolt, requiring vacuum tightness, heat resistance, medium resistance, self-loosening of bolts and nuts resistance, ... Besides, bolts and nuts often have certain mechanical tolerances, and when working in a continuously vibrating environment, they are easily self-loosened.

Cheaper and simpler micro-optics production
Adhesive for chip RFID in the smart card
ICA, ACA and TCA adhesives: Classification and applications
DELO ADHESIVES - HIGH SPEED CARRIER BONDING
DELO ADHESIVE FOR GASKETS, CURES IN JUST 3 SECONDS

DELO - the world's leading brand of industrial adhesive products and adhesive solutions from Germany. DELO adhesives are outstanding in diversity, suitable to many different materials, for high tensile strength and resistance to harsh environments.

 DELO ML - khoá ren

In the field of mechanics, hydraulics, pneumatics, there are many components that need to be connected by threaded bolt, requiring vacuum tightness, heat resistance, medium resistance, self-loosening of bolts and nuts resistance, ... Besides, bolts and nuts often have certain mechanical tolerances, and when working in a continuously vibrating environment, they are easily self-loosened.

There are many solutions to this problem such as: using metal gaskets, rubber o-rings, thread seal tape, or using thread-locking glue, ... In there, using thread-locking glue is the best choice. Thread locking is the most effective solution for fixing connections that require high strength and vacuum tightness.

Thread-locking adhesive is also a product line that DELO has invested in and researched to produce quality adhesive products. Products are used for this application include:

DELO ML 5198, pipe thread sealant, light yellow color, medium resistance is very good;

DELO ML 5298, pipe thread sealant, blue color, with high compressive shear strength, good chemical resistance;

DELO ML 5249, sealants for all types of bolt-nut threads with requires vacuum tightness, low viscosity, blue color, high mechanical properties, and extreme chemical resistance;

HUST Vietnam has compiled and sent to you a summarize the specific properties of the above adhesive lines table as below. You can easy to find possible adhesive for your applications:

DELO

ML 5198

ML 5298

ML 5249

Component

  • Derived from the 1-component, solvent-free, modified methacrylate ester
  • Compliant with RoHS directive 2015/863/EU

Used in a temperature range

-60 ~ +150 oC,
 (Depending on a specific application may be conformed other limitations)

Curing

• Anaerobic curing at room temperature, under metal surface catalyst, initial curing after several minutes and finally cured within 24h;

• The curing may be assisted by heat addition or activator as DELO-QUICK,…

Applications

Surface sealing, tubeless tire rim, metal surface with rubber, threaded pipe

• Coating for all screws, vacuum tightness, for air supply pipes,…;

• Specialized for sealing bolts, screws, threaded protection;   

Properties

  • High viscosity, help to run-resistant;
  • Low strength to easy to remove adhesive;
  • Can seal large gaps and passivated surfaces by using DELO-QUICK.

When determining the tightening torque considering the frictional torque of the screws, the following total frictional torques can be used for the calculation: μ total 0.10 to 0.13 on blank stainless steel screws, μ total 0.13 to 0.17 on phosphated stainless steel screws;

Color

Yellow

Blue

Transparent

Transparent up to 0.4 mm if heat addition or be activated

Density

1.1 (g/cm3)

Viscosity

Pasty

1000 mPa.s, thixotropic

Curing time

(at 23oC, on phosphated zinc screw)

Until initial strength:

5~10 min

10~15 min

5~20 min

Until final strength: 24h

Off-Torque

Without M (on):

5 Nm

14 Nm

18 Nm

With M (on) =46 Nm:

44 Nm

50 Nm

50 Nm

Compression shear strength

5 MPa

15 MPa

15 MPa

Chemical resistance

Very good

Storage life

12 months, at room temperature (max. 25oC), with unopened original cartridge up to 200 ml

12 months, at room temperature (max. 25oC), with unopened original cartridge up to 600 ml

 

For more information, please contact us.

HUST is proud to be the exclusive distributor of adhesive products, dispensing, adhesive curing systems, and technology transfer from DELO in Vietnam!