Dispensing without bubble, not jam with DELO FLEXCAP – smart valve!

DELO FLEXCAP is a close valve, operate by the elastomeric membrane. It replaces for normal piston, thus, this is a perfect method to store, move, and dispense glue without bubble – help dispense exactly adhesive amount.

• This is the new version Microdispensing Valve adhesive!
• Advantage of DELO-DOT PN3 than other valves: dispensing adhesive without nozzle, not contact. Therefore, this equipment allows dispensing super small adhesive amount, prevent the impact of the valve with the material surface. Besides, no necessary to move the valve follow the z-axis during operation.

DELOMAT 101 dispenser for high precision glue dispersion in the laboratory scale. 

Suitable for Lab of the R&D department in the industry. 

The device is really compact, small, slight, easy to use, and compatible with a wide range of single-component adhesive lines that from very low viscosity to pasty.

The DELOMAT 100 pneumatic dispensing system includes 3 main parts: the DELOMAT 100 Controller, the DELO-XPRESS 951 (NK) Pressure Tank, and the Pinch Valve.

The device has a simple structure, is easy to install, and can be applied directly by hand or attached to the robot arms for automatic control.

Compatible with DELO glue bottles up to 1 liter volume. In addition, it can be used to spray surface cleaning solutions before applying glue.

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

DELO-XPRESS 905 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 200 ml side-by-side glue cartridges and 1:1 and mixing ratio 1:2. This is a larger version of DELO-XPRESS 903, for larger volume glue bottles and for applications where large areas of adhesive are required.

The gun uses compressed air to help apply the glue accurately, without the glue falling due to residual stress like other manual guns. The force acting on the trigger lever is very small, and the weight of the gun is quite light, the design does not cause hand fatigue while applying the glue.

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.

DELO-DOT PN5 - A new high-performance micro dispensing valve that can reproduce dispensing results at a dispensing frequency of up to 300 Hz. The plunger speed reaches twice the maximum value of its predecessor, DELO-DOT PN3.

This pneumatic jet valve is easy-to-use and features tool-free maintenance of its fluid system. Its compact design allows for easy integration into production systems.

The DELO-DOT PN5 offers a contactless application preventing collisions between the dispensing valve and the component. High-viscous materials and difficult media can be dispensed accurately, precisely, and reliably.

• The DELO-DIV VD600 is the larger model in DELO's new line of metering dispensing valves. Thanks to the screw piston principle, it provides perfect accuracy, regardless of the viscosity of the adhesive.

• With a dispensing volume from 1.4 to 16.0 ml/min, the DELO-DIV VD600 is best suited when larger flow rates are required.

• Each axis has 2 linear guide rails, providing greater stability.
• Z-axis brake motor, greatly increases equipment stability and movement precision.
• Standard 4 liter ingredient tank (optionally available 0.5L, 2L, 4L, 20L).
• Equipped with a quantitative glue control system with an air pressure injection valve to spray the glue onto the product for uniform thickness.
• High-precision pressure regulating valve, suitable for a three-axis working platform, stable and accurate control of output glue, and no splashing of glue.
• The spray width adjustment range is 2mm-20mm, and jet and mist spraying can be realized.

Model: TH-2004D-300-2004AB1

• Specialized for 50 ml 2-component glue bottles.
• Equipped with a quantitative glue control system using air pressure and time.
• The controller accurately controls the amount of glue pumped out, and has a vacuum mode to prevent the glue from dripping when the pump stops.

DELO DropX reliably cleans dispensers when using adhesives in production. Media residues are extracted from the outlet openings of the dispensing valves. This process is made contactless thanks to a vacuum of 0.9 to -0.1 bar. The internal adhesive reservoir collects the residue and holds up to 2 ml of media at a wide range of viscosities.